if you have trouble getting it to work, try renaming the dxdi.dll file to d3d11.dll (located -> (Wherever you installed BeamNG)/BeamNG.drive/Bin64/) How to Install ReShade Note - The version of ReShade I used for this tutorial was: 220.127.116.112 - Tested for BeamNG 0.11.5 Step 1 - Download ReShade from here: https://reshade.me/#download The file you download will be a .exe file. Step 2 - Run the .exe file you downloaded. You should see a window that looks like this: Step 3 - Click the big "Select game" button. You should see a window that looks like this: Step 4 - Select "BeamNG.drive.x64" Step 5 - Click "Direct3D 10+" (As seen in step 2) Step 6 - When it asks if you wish do download a collection of standard effects, select "Yes". Step 7 - It will then ask which shaders to install. Go ahead and press "OK". Once you see this, pat yourself on the back. ReShade is now installed. Step 8 - After you finish installing ReShade, launch BeamNG. You should see some text at the upper left corner of the screen that looks like this: ReShade should now be installed. Step 9 - Start BeamNG and press "Shift+F2" on your keyboard. You should see this window appear in the center of the screen: The menu will have a tutorial that helps you become familiar with how to use and configure ReShade. How to Uninstall ReShade Step 1 - Make sure BeamNG.drive is closed. Step 2 - Navigate to /(Wherever you installed BeamNG)/BeamNG.drive/Bin64/ Step 3 - Remove the following three things: Remove the "reshade-shaders" folder. Remove any presets you created. (name_of_preset.ini) Sort the remaining files my date created. Remove the most recent ".dll" file that was created. It's most likely called: "dxgi.dll" Step 4 - After you are finished, launch BeamNG. ReShade should now be completely uninstalled. I hope you find this tutorial helpful!