Apparently, when you export a vehicle from Automation, it will have an engine that is modeled from the inside. In BeamNG, you're able to see only the outside of an engine, at best. All the detail that you can see in Automation's Engine Designer, just can not be seen in Beam (unless you deliberately clip through the car with free camera). This doubles the car's polycount, and makes it more resource intensive needlessly.
Hi, so I'm having an issue with BeamNG/Automation. I'm not sure which game is causing the issue. So, the issue is that a particular car I have doesnt seem to work correctly in beam. How so? Well, take a look at this screenshot So, this is the car completely stationary with the handbrake on. The G-Force graph shouldnt look anything like this. It should be dead center. This is how it looks diving in a straight line Whatever is happening with this car causes it to turn to the right and trying to control the car causes the car to snap and spin out. I removed all aero off the car, set the suspension preset to sport and even changed the engine to a different one and the issue persisted I gave a friend my CAR file and they exported it and used the car on their version of beam and it was completely fine but that doesnt answer if its my version of automation or beam thats the cause because ive exported other cars today and theyve had no issues. It's a very odd issue and so far everything I've tried has resulted in no effect. My next course of action is to uninstall and reinstall beam and see if that fixes the issue Okay, update to this I had my friend send me the export they did of my car so I could test to see if it would work fine with my copy of beamNG, and it did. It worked exactly how it did yesterday, before this issue I'm having started. So my only guess is that my copy of automation is borked and not exporting correctly. I tested with a new car just now and it was initially fine but as soon as i added headlights it started doing the same thing as the other car. Very odd. So i think fixtures are causing some issues, which agian is pretty odd as other cars i have dont do this, even with new exports. I'm now updating my game to the open beta build as my friend who exported my working version of the car is on that build
Automation vehicles will spam the console with errors since the 0.20 update. "String value for beamStrength ...." bla bla bla (error code from my Gavril Vertex / Fort Focus mod, does happen with automation cars in a lot bugger fashion due to the fixtures) This is due to every automation fixture having it's beamStrength written like this: "beamStrength": "1200", The game wants it like this: "beamStrength": 1200, This is a really simple issue to fix in the exporter, this console error spam does happen with every vehicle that has detachable fixtures
This car wouldn't load ingame, it just shows an error saying I should run in safemode or perform a clean installation. (I exported it from Challenges fyi) Anything I should do to fix it?
At the moment automation cars do not have 4wd drive assigned to them for a button, if you use the normal button for toggle 4wd, nothing happens. This is probably due to the system being misnamed, but it'd be great to have a patch.
Hi, everyone! I have an issue with gearbox in cars imported from Automation. It won't shift up from 1st to 2nd in "arcade" mode. This error occurs only if 1st gear ratio is above certain limit. For example with 2.16 ratio (top speed ~20 km/h) works fine. With 4.31 ratio (top speed ~10 km/h) it stays in 1st gear forever. Is there anything I can do about it?
Hey my brake temperatures just go insanely high whenever I touch them even slightly, making it near impossible to stop. How do I fix this?
I had the same thing. I reverted back to previous version because cars had a rubbish export. Driveshafts in the ground, no chassis shown etc.
I would stop reporting bugs just if the modern headlights glass would be exported transparent: i mean that in Automation they are transparent but when exported they are opaque white, so having them transparent in Automation and exported opaque white is very ugly. Also, in this car body, the "Export car" icon takes a life for loading in the lastest hotfix
Hello, I'm having a camera problem with my Automation cars: the chase camera is stuck too low. For reference, this is how it looks if I hold the right thumbstick up:
Getting some strange "frosting" around the edges of Automation fixtures that cut out the body. Most obvious in this picture around the vents and headlights on the hood. Becomes increasingly obvious as the camera is rotated so that it is looking at the fixture at an angle, as opposed to head-on. This bug has been around for about a month now, roughly, but don't know precisely when it showed up. Example follows:
Problematic tears in the body of each car I make. Is there a way to fix this and is it from BeamNG, Automation, or my Computer's System?
This happens occasionally. What I do is export a car 3 times and delete the ones with issues like these. 1/3 times I get a perfect export --- Post updated --- This happens occasionally. What I do is export a car 3 times and delete the ones with issues like these. 1/3 times I get a perfect export. Sometimes it's the automation body used
hi guys, i'm having a problem with the mods i put from automation to beamng drive, be it download or what i do in the game, they all have a chrome appearance and no texture and color, what would this bug be? What do I do to tidy up?
