Released Capsule 3.5

ho jeng ah

 

Can you make a low roof version of the 19.5m double deck? Another issue, the weight of fully loaded 10.5m double deck cargo capsule (27.5t) exceeds the maximum allowable weight for 2-axle vehicles (18t for buses), you may consider swapping only the lower deck seats with cargo and keeping the upper deck intact (and also give the option to do the same in the 3-axle and 4-axle variants).
--- Post updated ---

 

A physical impossibility:
To recoup the capacity lost by removing the boxes that intersect the stairs, you could replace those L size boxes above the rear axles by XL boxes (you'd need to remodel the railings to accomodate XL sized boxes though), and few M sized boxes on the floor:

This part can get one XL (on the flat area above the wheel) and one L sized box (in the corridor, behind the driver), and one M sized box behind the driver seat too:


The bellows could get one L sized box each as well:


Similar physical impossibilities in the 2-axle double deck (XL and L boxes inside each other):

 

I found two new Versions for two Capsule Model's

 

The former is a VanHool AGG300, which is a puller-configuration (frontmost carriage's rear axle is driven), the latter is a PALT-bus

 

CYCJoseph updated Capsule with a new update entry:

Minor update

Read the rest of this update entry...

 

"I pray that you take this favour as a token of my gratitude."

 

CYCJoseph can you please add the air suspension as there is on the wentward the air compressor that the hydraulics adjustify it self while holding parked to comfort and max height as it is

 

But that would imply having airbrakes too, and this bus is good enough without those.

Also, there's a small ramp tucked under each door. Presumably it's for wheelchairs, but it should be able ot compensate for the bus not being able to tilt.

 

Turntable grabrails are not sturdy enough, they bend like crazy:

 

Martian gravity turns out to be the optimum gravitational pull for the Capsule Cargo.

 

The new cab is beautiful, however low height versions seem to be missing their mirrors?

 

Maybe we need more powerful engines?

 

OverPower's Segra 12.9l engine could work there.

 

If you mean the side mirrors, can you check if the mirrors are installed in parts selector?

 

Well i cant even select the low height version now, it just goes to the high roof

 

Managed to resub and fix it, no worries now

 

Hiiii, is the bus supposed to pull a lil to the left? tested the smallest versions, not sure if the rest do that.

 

I downloaded the Arcanox Core and the Hybrid is working for me now

 

Best mod ever, I would like to ask is that possible to make a bi-articulated single & double decker version? It might be great to see a big snake on the road lol