1. This is an off-topic section of the forum.
    If you have an issue related to BeamNG, please post in Troubleshooting section instead.

Need some help immediately with my PC

Discussion in 'Computer Hardware' started by Rainvest, Jun 8, 2017.

  1. Rainvest

    Rainvest
    Expand Collapse

    Joined:
    Dec 26, 2014
    Messages:
    1,908
    Using the z170 chipset and using the EZ tuning wizard, chose RAID and thought it wouldn't format my shit. I get to this screen. Bios still thinks that it's not in a RAID format



    Me being retarded with my data. I boot up and it now it blue screens to the inaccessible boot device. My data isn't that important but I would like to have it back.
     
    #1 Rainvest, Jun 8, 2017
    Last edited: Jun 8, 2017
  2. AdamB

    AdamB
    Expand Collapse

    Joined:
    Mar 8, 2016
    Messages:
    531
    Your pictures aren't working..
     
  3. Rainvest

    Rainvest
    Expand Collapse

    Joined:
    Dec 26, 2014
    Messages:
    1,908
    Now they are
     
  4. AdamB

    AdamB
    Expand Collapse

    Joined:
    Mar 8, 2016
    Messages:
    531
    Do you try to reset the bios settings?
     
  5. Rainvest

    Rainvest
    Expand Collapse

    Joined:
    Dec 26, 2014
    Messages:
    1,908
    Ill try pulling out CMOS battery and putting it back in.
     
  6. AdamB

    AdamB
    Expand Collapse

    Joined:
    Mar 8, 2016
    Messages:
    531
    Actually what I recommended doing is booting to a live Linux USB, then copying all your data over, then resetting windows
     
  7. Rainvest

    Rainvest
    Expand Collapse

    Joined:
    Dec 26, 2014
    Messages:
    1,908
    I reset cmos, takes me to this screen.
     
  8. TechnicolorDalek

    TechnicolorDalek
    Expand Collapse

    Joined:
    Dec 6, 2013
    Messages:
    1,026
    Did you set your SATA configuration to RAID mode? Did you build a RAID array? If you built a RAID array your filesystem is gone. You would have to boot into a Linux live disc or USB and use a relatively advanced file recovery tool from then on.

    Why did you even want RAID with those disks? What level? Why would you think it wouldn't format them?
     
  9. AdamB

    AdamB
    Expand Collapse

    Joined:
    Mar 8, 2016
    Messages:
    531
    What screen? I don't see anything...
    --- Post updated ---
    Nvm. Just go into bios and re configure everything now
     
  10. Rainvest

    Rainvest
    Expand Collapse

    Joined:
    Dec 26, 2014
    Messages:
    1,908
    Yes! Sucess! Resetting the CMOS worked! It still wants to check the disk on boot up however.


    Should I keep skipping it or do it?

    Nothing atm seems to be working strange or corrupted.
     
  11. AdamB

    AdamB
    Expand Collapse

    Joined:
    Mar 8, 2016
    Messages:
    531
    Go ahead and let it check the disk. It might need it.
    It's asking because of the bsods
    You're welcome :)
     
  12. TechnicolorDalek

    TechnicolorDalek
    Expand Collapse

    Joined:
    Dec 6, 2013
    Messages:
    1,026
    That's great and all, but again, what exactly were you trying to accomplish in the first place? What was the point?
     
  13. Rainvest

    Rainvest
    Expand Collapse

    Joined:
    Dec 26, 2014
    Messages:
    1,908
    I was originally trying to use RAID 0 but without my knowledge that it formats your crap. I have a 2.5 inch laptop drive that I used and wanted them to be in 1 whole drive. I'll back up my stuff next before I go roaming around my computer without knowing whatever the hell it does.
     
  14. TechnicolorDalek

    TechnicolorDalek
    Expand Collapse

    Joined:
    Dec 6, 2013
    Messages:
    1,026
    Yeah, that's a terrible idea. Assuming the 1TB is a 7200RPM 3.5" HDD and the 500GB is a 5400RPM 2.5" HDD you're going to see little to no performance gain, as the 2.5" is likely to be approximately half as good as the 3.5", bringing the 3.5" down to its level, and then combining their performance to double back to the typical performance of the 3.5".
     
  15. AdamB

    AdamB
    Expand Collapse

    Joined:
    Mar 8, 2016
    Messages:
    531
    Exactly right. I have a whole computer dedicated for personal stuff (the frying pan)
     
  16. BugHelppperrrr

    BugHelppperrrr
    Expand Collapse

    Joined:
    Jun 26, 2016
    Messages:
    100
    well i have done those stupid things before. (no data loss, just cant detect drive) i just go back to last setting and boom!
     
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice