Otnas Kucing Esprit W4
After two years of development and a bit of hiatus, it is decided that I have to put a bit of an update to the car.
Under the hood is the same but improved “Futura” 2.0 litre, 16-valve, DOHC turbocharged engine. For the Ver.II trim, it produces 315hp and 416Nm of torque which channels its power to all wheels via a 5-speed manual gearbox. The Sphinx-RA trim has a 2.35 litre Futura engine with lighter yet stronger internals. This engine would put out 370hp and 526Nm of torque.
All Kucing Esprit W4 now run at 0.9 bar of boost.
Now performance wise, the Ver.II will accelerate from 0 to 100km/h in 4.8 seconds but the Sphinx-RA would do it in 3.7 seconds. Top speed for the Ver.II is 280km/h and for the Sphinx-RA is 328km/h. The car can go further since it can be modified.
To improve cornering capabilities, the car has active center differential, adaptive dampers and swaybars, and a rigid yet lightweight chassis. It also has a set of brakes that won’t fade after one lap of racing at the racetrack.
Known bugs:
1. The tailight sometimes won’t emit any glow. By respawning, it’ll fix the issue
2. The speedometer numbers don’t look really clear. I have tried exporting from Automation many times but won’t fix the issue so its the best I can do.
More pics.
If you would like to support me on making these cars, you can do it via Paypal or via Saweria
Also try the classic, first generation Otnas Kucing that could do literally anything! https://www.beamng.com/resources/1971-otnas-kucing-the-little-car-that-could.15911/
NEW! Otnas Turbodiesel sedan that would go from 0-100 in just less than 6 seconds stock! https://www.beamng.com/resources/1985-otnas-tamtam-zen-2-5-turbodiesel.23464/
Dismiss Notice
In the upcoming days mod approvals could be slower than normal.
Thank you for your patience.
In the upcoming days mod approvals could be slower than normal.
Thank you for your patience.
1988 Otnas Kucing Esprit W4 - Turbocharged Hooligan 2.6
Turbo Hatch with Supercar Capabilities
Recent Updates
- Heavy Update Jan 17, 2022
- Update 6 - Torque Vectoring Update Apr 27, 2021
- Update 5 - Flywheel Update! Feb 28, 2021
Recent Reviews
-
-
-
Author's Response
-
-
-
Author's Response
Thank you!
-
-
-
Author's Response
Thank you!
-
-
-
Author's Response
Thank you!
-
-
-
Author's Response
Thank you!
-
-
-
Author's Response
Thank you!
-