Dismiss Notice

In the upcoming weeks mod approvals could be slower than normal.
Thank you for your patience.

Civetta Scintilla GTB Exhaust And Livery 1.4

A few new parts for the Scintilla, all inspired by the Ferrari 296 GTB

  1. someguy5738
    someguy5738
    5/5,
    Version: 1.3
    Ok screw this, I'm leaving an actual review now. I got bored of the GTB Strada breaking and flying off so I decided to give this mod another shot after laying dormant in my mods list for weeks, this time with the GTB Corse.
    And I must say... it looks BEAUTIFUL! The low headlights look absolutely gorgeous coupled with the 296 GTB-inspired livery. The exhaust looked pretty neat as well!
    Driving-wise it's literally the vanilla GTs Corse config, but the rear-end is slightly more oversteery due to the wing being the regular active wing instead of the Corse wing - which, surprisingly, gives it a bit more charisma!
    It is simply stunning to look at and I cannot get enough of how well you modelled the fenders to get the missing vanilla headlights to flow seamlessly into them. 10/10 and I would definitely recommend!
  2. DRIFTX0956
    DRIFTX0956
    4/5,
    Version: 1.3
    Very good mod, however the Strada config spawns in the air and flies away lol. I presume some parts are missing, or broken somehow. Please fix this whenever possible.
    1. SubieBerry
      Author's Response
      You probably have a conflicting mod installed. It spawns just fine for me, and I haven't had anyone else report this issue. Maybe try a cache deep clean?
  3. yooyoojoonjoon
    yooyoojoonjoon
    5/5,
    Version: 1.3
    awesome! can you make a real hybrid engine? ( original 296 gtb has hybrid engine! )
  4. JlnPrssnr
    JlnPrssnr
    5/5,
    Version: 1.3
    Love this rear end (heh)
  5. ghost_cauli
    ghost_cauli
    5/5,
    Version: 1.2
    Update: @SubieBerry delivered
    1. SubieBerry
      Author's Response
      Thanks to your suggestion :D
  6. kenjie1027
    kenjie1027
    5/5,
    Version: 1.1
    yoooo, this so clean, thx dude :>
    1. SubieBerry
      Author's Response
      Thanks! And thank you for the suggestion about the license plates :)
  7. jcbowens14
    jcbowens14
    4/5,
    Version: 1.0
    mod seems a bit bugged for me as theres a black area where the headlights would be (if the low headlights werent on) otherwise 10/10 mod
    1. SubieBerry
      Author's Response
      This mod doesn't affect the headlights at all, your problem must be caused by something else. Even if you don't have my low headlights mod installed, the configs will just spawn with the vanilla headlights, without any problems whatsoever. It would be greatly appreciated if you could edit your review :)
  8. Stefan190506
    Stefan190506
    5/5,
    Version: 1.0
    I decided that if someone asked me why I’d specced my car like this, I’d say it was James May’s and I was simply borrowing it for a few days. And with that sorted out, I set off.
    1. SubieBerry
      Author's Response
      Haha, nice reference :) I do have to agree with Clarkson that the 296 GTB press car specs can be a bit... bold
  9. Angry_Bird
    Angry_Bird
    5/5,
    Version: 1.0
    Really outstanding exhaust jbeam and modelling, Would make a really good basis for an American V8 supercar
    1. SubieBerry
      Author's Response
      Thank you! :)
  10. kenjie1027
    kenjie1027
    5/5,
    Version: 1.0
    Love the look, only complain is that, why the license plate is so small on the new bumper
    1. SubieBerry
      Author's Response
      Thank you for your feedback! I personally prefer the look of the small license plates, they are quite common on supercars here in the Netherlands (usually as a sticker, you can find some pictures here: https://topgear.nl/autonieuws/kentekensticker-verboden-of-niet/). But since you prefer the normal ones, I will include regular sized rear license plates in the v1.1 update, it will be out on Monday (hopefully)
  11. ghost_cauli
    ghost_cauli
    4/5,
    Version: 1.0
    This is solid, but IMO it'd fit better if it was in line with taillights (partially cutting through the valance)
    1. SubieBerry
      Author's Response
      Thanks for the feedback! I will add this in v1.1, though not cutting through the valance, just at the top of the rear grill. Here are some of the WIP pics: https://imgur.com/a/Zj9PzPz
  12. yooyoojoonjoon
    yooyoojoonjoon
    4/5,
    Version: 1.0
    good, but i can't find this...
    1. SubieBerry
      Author's Response
      What do you mean you can't find this? All custom parts I added have 'GTB' in their name, so you can just search 'GTB' in the parts selector and that will show all the parts. Additionally, I've included a config you can select in the vehicle selector, that comes with all custom parts already applied :)
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice