Unsupported Ibishu 240BX 1.8

the mod was outdated + unsupport

Good mod, there are some areas that need improvement though, like the tailgate doing a 180 when opened. it would be good to see some more customisation for this mod, otherwise its a good mod

Great mod, I'm looking forward into it. All you need to absolutely perfect it is: fixing the openable trunk, adding a UV map to the files, so we could make custom liveries suited for the 240bx, and make the taillights better, maybe add clear tails, and allow the use of custom / moddel rear fender flares / widebody + some more rear bumpers or as said before allow of use of modded ones

the mod is great body wise, but the taillights are kind of lacking.
some improvements would be to make the taillights look more like a 240sx, add 180sx type taillights, and something people would really like is 180/240sx fenders and bumpers, like with that little notch at the end of the fender. But otherwise great mod and very enjoyable.

I would recommend you to put more effort into the taillights but other than that its a good mod

I am super biased due to have a 240sx but I love this. Its what the 200bx should have been. Great work. Hope to see some more down the road, (maybe some factory wings?)

the sideline and sideview gave me totally mitsubishi eclipse vibes. the 1. generation eclipse. sadly this car was never in a game. and this is the closest so far! thank you!

Beautiful body style! My only issue is a few spots where the livery either mirrors itself or completely breaks. Other than that, great work!

Now we're talking about a real 240SX! great job.

i like the idea! Keep going

Nice mod! looking forward to more.

Definetly an improvemet!

First of all design wise i do appreciate what you changed. The new alternative taillights suit the car way better and i see some definete polyflow improvements! I love the idea of a 240sx style interior and your attempt was good! The Hatch isnt hinged properly so it will hang in mid air when ripped off but its definetly an improvement

I feel like the trunk like should be way sharper still, the real 240sx rear was quite sharp and i feel like it would suit the car well! The Non alternative taillights look not as good as the alternative ones so i would suggest that you could maybe change them to look like the ones from the 180sx? That would also really help customisability. The front 240bx front bumper is really short compared to the real one wich does extend quite a bit. There is still some model issues and the interior has some weird shading but overall its really an improvement

Cinfigs should be properly redone tho. If you want i could help you a little with all those issues.

I would suggest that you could make a discussion thread so that people can report bugs easier and make suggestions.

3/5 quite enjoyable now and really starting to live up to its potential

the mod is good, but after the update, the trunk started shaking when I was driving, I also wanted compatibility with mods for bodykits for 200bx

With some better modelling and jbeam quality, this mod has the potential to be a great customization mod.

I reccomend you to learn to model and jbeam a smaller amount of content at a much better level of quality, rather than to jump head-first into implementing your many ideas and plans.

I like the concept of this mod but there's a lot of glaring issues with the car itself. I'd suggest you open a forum discussion page for the 240BX if you want to continue updating this.

would love to see a coupe body, but this is very nice already

Like Nacho Problem said, has really good potential.

The mod has potential but its still lacking in many areas.

First of all the trunk is just a little too tall. if you made the trunk just a bit lower and the tail lights just a bit less tall it would look way sleeker. Second of all the line that goes across the end of the trunk (the one that goes from the side to the bottom) should be made sharper. The light textures are sadly really dissapointing and only a solid color. Making the bottom half yellow would have already been such an improvement.

The option to not even being able to equip different front fenders is really limiting. The model overall needs a lot of work as the shading is quite off. The Jbeam isnt even really edited in the trunk/hatch area.

Pretty ok but 3 stars for the effort and nice idea. I hope this gets worked on further as it has a lot of potential

nvm got it. also i have a suggestion.

you should put the 240BX name, between the reverse lights, also the blinkers should be on the bottom of the tailight. and last one, make the taillight / trunk lights line a bit darker.
otherwise, Very good mod.
(to the person below me, i just didnt realize what was changed. im not blind)

Decent mod! The person under me is obviously blind