Wentward Transmission Pack 6.1

- Fixed NBS Script to only activate at 0kmh, and shift into drive under 10% brake, allowing for a crawl mode
- New Voith E300.1 Economizer module, which restricts kickdowns
- Converted Allison T-310 to Allison T-375R. Same gear ratios, but different name, as I am using data from the T-375R
- Allison converter is now more loose, like the Voith
- Fixed W3A reverse axle sound glitch
- Fixed D864.5 configuration not spawning with the right engine

V6.0 brings many new features to the Wentward Transmission Pack! 3 new gearboxes from Voith and ZF, A complete Voith D864.5 Remaster, Updated sounds, a completely new engine for the Voith, and NBS (Neutral on Bus Stop) scripts

---

---

Discuss the update here, in the new discussion thread
https://www.beamng.com/threads/wentward-transmission-pack-v6-0-release.103659/

---

New...

CHANGELOG
-Added ZF Ecomat 5HP-600 Transmission
-Added 3.80:1 high speed differential

- Fixed ZF -500 series sounds (Should have been lower pitched) (They used -502 sounds)
- Fixed volume for -500 and -604 ZF gearboxes

Yes, it has been forever since the last update, but I promise this is worth it!



NEW GEARBOX - VOITH DiWA NXT
Starting with the new gearbox, the 7 speed Voith DiWA NXT gearbox has been added. It shares the same sounds as the DiWA 864.5, but has 7 gears and better logic. It always finds the right gear for the right time, and I still kept the kickdown, because it's a necessity

NEW LOGIC - ZF ECOMAT...

I am very happy to announce the long awaited v4.0 update for the Wentward Transmission Pack! This update has a lot of new features in it, new sounds, reworked torque converter and reworked shift logic for truck transmissions. Watch the video below for all of the new sounds and the demonstration of the kickdown switch!

---

CHANGELOG
-New ZF 500 series sounds
-New ZF 6HP-604 sounds
-New ZF Ecolife sounds
-Kickdown switch for the 604...

I have added the Allison T-310 5 speed automatic transmission to the DT40L as a suggestion. It comes with 4 different torque converters with all different stall ratios, and a custom sound that sounds pretty close to the original.


I have also reworked the Voith DiWa 864.5 sounds again. I found an OMSI 2 mod, highpassed it at 600hz, and then used a fine EQ to separate out the Voith whine from the engine. The remaining engine noise is just white noise, which...

V2.0 releases with 2 new transmissions and sound reworks for all of the ZF Ecomat transmissions!

Each ZF transmission will come with its own, unique sound, that I have tried to replicate from real life, so no more of the same sounds for all!

The 500 series has a high pitch, but the 502/C series beats it in pitch, and the 604/C has a lower pitch.

I have also adjusted the volumes, so that in 4th gear and above (Direct Drive and Overdrive) there is no input gear...

Hello all! V1.4 has released! It includes real Torque Converter programming, 2 NEW Manual transmissions and 1 new automatic!!

I have added realistic torque converters to the Voith and ZF Ecomat transmissions! The Voith converter locks up in 2nd, and the Ecomats' locks up in 2nd, but at a low RPM. Even though the Ecomat converter locks up in 1st in real life, I couldn't do this, because the gears would change from 1st to 2nd and keep swapping going up hills on WCUSA, which is not...

Hi everyone! V1.3 adds realistic sounds to the ZF Ecolife and contains new programming for the ZF Ecomat series!

I've added gearbox lag to the Ecomat, so when you let go of the throttle, it doesn't shift up instantly but rather after a delay (tried to make it like an L94).

I have updated the ZF Ecolife with new custom sounds. The reference came from an O500LE with an Ecolife 2. I heard a high-pitched noise, which I added to the script, but I'm not sure if that was the real sound or if it...