0.31 Discussion Thread

Well it’s now a bug. So you need to enable it until they patch it

 

I really like the new T-Series, I have waited for so long for a cab over truck, and finally it is here, thank you devs for all the hard work.
And so glad the scraping sliding sounds show up in replays now, add so much

A replay bug. Any lights that is on when recording a replay, will not have any light sources in the replay. They flash ones In a while. But don't light anything up.

 

I noticed that after update 0.31, the ABS system in Beamng couldn't work well. This issue influences all cars, particularly severe in Legran and SBR4. The front wheels will be locked up at braking when ABS on. Both arcade mode ABS and ABS in car parts list have this problem. I use keyboard and mouse to play so it's a big problem. Hope there will be a solution soon.

 

updated pictures of dinosaurs. i also found a bug where the "flammable" sticker is no clipping through the pillar (only from far distances)

 

DELETED

 

Is there a thread to collate all the cars and trailers missing Campaign Cargo Load Box's?

I have noticed all the tilt deck trailers (22, 30 and 40 foot) do not have Cargo Load Box options.

The D series
Short Frame: No boxes in bed accessory. or roof racks.
'Short bed' Family; Flatbed and Stepside bed are missing Cargo Load Boxes.

The Aurata has a perfect little spot for a box.

 

Found some glitches related to the Sleepers (plus one related to the front suspension of the Cab-Over frames).

1) The Sleeper Doors on all Aero Sleepers (both the Conventional Large/Conventional Large Aero ones and the Cab-Over Aero one) have triggers only on the inside, you just can't open them from the outside.
2) The Sleeper Door on the Conventional Small Sleeper has no trigger on the inside, it only has it on the outside.

Also, a small irrelevant note: the front suspension of all the Cab-Over Frames seems to be a bit more susceptible to losing its alignment compared to that of all the Conventional Frames. It needs to become equally as strong.

 

It´s not just in 0.31, but annoying since a long time: when you choose "flying start" for a time trial, the timer justly starts at the start line, but in the results your time is displayed from the flying start point is displayed. I just had a long time trial of 45:01 but the results read 45:23 for instance. So a flying start atually makes you slower which makes no sense at all.

 

Is gear grinding disabled now? Absolute silence at 0.31 then no clutch/wrong gear changing.

 

Looks like collisions are a bit wacky?

 

After updating, all replays recorded prior to V0.31 now crash my game. They show up in the replay selection, but clicking play freezes the game and crashes. This usually only happens with large replay files (greater than 2gb), but with the update it happens for all file sizes, with or without mods, and irrespective of number of vehicles (traffic, for example). Replays recorded in the V0.31 update actually work fine, strangely enough. Is anyone else having this issue?

 

See the warning on top.

 

Is this a bug of the T-Series?

 

both versions of the 1973-1975 moonhawk front fascia is missing textures. screenshot taken in safe mode

 

If you have crashes on startup, do a deep clear of your cache and delete old version user folders, I had some customized old t-series trucks that kept crashing me. Something cool that could be added in the future is another brand of semi, irl back in the 60s-80s and some of the early 90s, if you made vehicles at all you had some form of semi, gmc had the brigadier, chevy had the bison, dodge had one I can't remember the name of, ford had the LDL and LTL 9000s, every automaker had a semi until the emissions laws in the late 80s put a near complete stop to it, GM finishing off the class 8 truck market for them with the top kick and Kodiak. It feels like gavril is the GM of the beam verse I guess, the conventional T-series looks like a bison, the cabover looks like chevys cabover tbh

 

Synchronizer damage of reverse gear while driving in reverse.

To replicate: disable gearbox safety, clutch assist and throttle assist. Select a vehicle with manual transmission
1. Drive the vehicle in reverse in reverse gear
2. Press the clutch pedal and shift into neutral
3. Hold the clutch pedal in or release the clutch pedal (doesn't even matter idk why)
4. Press the clutch pedal fully in (wait time before next shifting doesn't matter either)
5. Shift into R, you'll get synchronizer damage regardless.
--- Post updated ------ Post updated ------ Post updated ------ Post updated ------ Post updated ------ Post updated ------ Post updated ------ Post updated ---
I have some a question about the automatic gearbox in 0.31
In the "shiftLogic-automaticGearbox.lua" file

Code:

"jbeamData.torqueConverterLockupRatioWhileShifting"

this is listed but never used, is this a WIP thing?

Code:

tipInCoef = max(0, M.throttle - torqueConverterHandling.partialLockupTipInThreshold) 

The higher the throttle the higher the tipInCoef above the Threshold.

Code:

partialLockupReduction = tipInCoef * torqueConverterHandling.partialLockupTipInGain

Since the Gain is positive, the higher the throttle the higher the Reduction.

Code:

partialLockupRatio = max(0, 1 - partialLockupReduction)

The higher the throttle the lower the TC lockup, I found this a bit counter-intuitive. My guess is that since the min partial lockup is always being used during shifts, a lower lockup ratio when not during a shift will reduce the RPM jumping under high throttle input, is that right?
Since the lockup ratio shouldn't be lower while in gear compared to during shifting, IMO the last line should be revised to:

Code:

partialLockupRatio = max(torqueConverterHandling.minPartialLockupRatio, 1 - partialLockupReduction)

 

In WCUSA, the northern entrance to the sewer system (the tunnel in the construction site that travels down to the sewer/spillway) appears to be blocked by an invisible wall at the construction end of the tunnel.