0.31 Discussion Thread

[♥]Target Jump missions are broken. It will toggle SlowMo on impact but no points are awarded. I have tried the following: IntoTheDirt (wcusa), HitTheSpot (wcusa), and TargetJump:Bridge (utah), as well as the dozen target jumps on my map Gambler523 (not installed while testing the other target jumps)

[♥]Duplicating Prefabs makes original prefab invisible with no collision - also saved prefabs are invisible after restarting game. I loaded WestCoastUSA - selected several models (dae) on the map and made a prefab.json If I were to duplicate that prefab the original prefab disappears. If I were to simply make a prefab (not duplicate, just make a single prefab) then save the level, close then reload the game, after loading the level the saved prefab was invisible but still in the scenetree.

[♥]Opening WorldEditor(F11) in the MainMenu (before loading a level) gives a LUA error:


[♥]Side Projection terrain paints, or any terrain paints on steep hills, do not stay parallel to the ground and stretch in a seemingly random way. The examples below are not the only maps to have this issue. This happens on any map with steep hills and directional textures like rock cliffs.

Small Island: Its noticeable in several areas without raising the terrain or manually adding the paint, but the steeper the terrain the worse the texture gets skewed. So I raised the terrain and applied the rock terrain paint to that hill to clearly show the issue. Both pictures show the same hill, one side looks somewhat normal the other side is stretched and rotated.

WIP map mod. This map and any other mods were NOT installed while testing\confirming this issue on default game maps. But this map in this particular spot is included to show a much more extreme example. This issue didnt occur in 0.29 or older. The rocks stayed parallel and repeated as necessary without over stretching. The last two pictures show this same spot to show a 0.29 comparison.


[♥]Broken BillboardUVs\LODs - Floating Vegetation found in Italy, Small Island, and Industrial. These are only broken when viewed at a far distance, once close enough, the proper vegetation is there without any issues.




To ensure any of these bugs wasnt an issue that I created either with bad settings or mods; I deleted my entire userdata folder before starting the game. So no mods, no vehicle configs, no previous settings, no WIP mods (levels folder etc), and cleared cache, etc... I then also tested a second time in SafeMode.

For bugs or examples that were found within my map mod (side projection terrain paint and target jump) that map was only installed AFTER all of the default game bugs were found and were tested with no other mods installed. After I confirmed it to be a bug on the default game THEN I added my map mod.



EDIT:
[♥]"minimum speed" goal on Delivery Missions seem to be reversed. The mission starts with a checkmark already on the goal list on screen and unchecks after you reach that speed. Also after reaching that speed it does not give you the star for hitting that speed. (this has been broken since at least 0.30, but thought I would mention it again since I just tested it and its still broken on 0.31)

 

This gate has no collision on the construction site near the dealership

 

I know it'll probably be added at some time since the feature is experimental but can we have a way to mirror our designs to the other side of the car in the decal editor?

*Unless there is a way and I'm just missing it

 

I've found two issues with remastered T-series so far.

The first one is especially curious. While tilting the cabover with sleeper a metal strut (the rusty one) clips through the intake pipe


In the dump truck variant rear wheels sometimes clip through the load box as seen below (mind you I had like 18 tons of rocks in there, but I don't think that's unreasonable).

 

I was working on like 5 maps and when I load them all now it crashes?

 

This is probably the weirdest thing that's happened to me, and no, this isn't a joke. For some reason my copy of the game had both the old and remastered versions. Either way it's really cool seeing the differences beteen the two.

 

The old one was semi.zip and the new one is us_semi.zip, so it just forgot to delete the old one. Happened to a few people after the Covet remaster too.

 

On lowest graphical settings with all shadows enabled.

 

Thank you!

 

I hate Steam. It's taken almost two hours to download the update, man!

 

Hazards on the truck are a lil bright. I don't think they are meant to be white either ‍♂️.

 

I'm getting this too its just my maps as well and i didnt add anything special

 

weird question but could i have the zip for the old one? lol

 

User configurations won't load, Support ID:168517
Other than that love the update

 

The new truck is gorgeous, it's so detailed. The very first thing I did was drive around with the cab tilted forward. It works!

I like the new default camera look setting in-cab. Is there a way to increase look camera movements while using a controller?

The early front end panel specifically of the Moonhawk seems to have a texture issue.

Also, the Bluebuck trunk lid doesn't want to re-latch after being opened while loaded up with its cargo boxes.

 

Soo I dont knwo what im doing wrong but I cant reach the PTO controls on the Conventional Cab. It stays in the middle of both driver and passenger seats and I cant reach it no matter how I turn the camera

 

None of the custom T series configs I made load properly, the cabovers just load in as a white standard nose

 

Something's missing here (Applies to both left and right leaf springs)

 

*sigh* I want to love it, but I am not a Big Rig guy. The update is amazing in that respect. However, nagging major issues with normal play remain. Using Ai with police enabled is unusable... still. The police wig out and ram you for no reason. You can be minding your own business and out of nowhere... BAM! Then you get charged for hitting a police vehicle. Just the AI in general is worse it seems. When you load it up the little clock stays on screen for about 5 minutes and you have to drive around with it. I am running a Ryzen 3950x on and ROG x570 motherboard with 128gb of ram and a RTX3090ti and I struggle to get 30 fps in 1440p. Oh, and it's running on a Gen4 NVME. I am also getting intermittent freezing with traffic that I didn't get before. I do love the new stuff on west coast though. I just hope we focus on performance soon.

Edit: Before anyone says it. I am running 0 mods and a deep cache clean. I have been around a while.

 

custom configs for t-series do not work