So i'm making new i4 engines for the Vektor and altair that should at least replace the 160 i made months ago (just know more about making a good engine in Automation now). The new m40 engine would be finished and i'm also planning on making an m60 to replace the 250. BUT i also improved the 250 engine for the Altair with the modded jbeam for "sequential biturbo". So i could also port those to the Vektor. More questions/options in the poll. How to vote: you have two voices: select replace or add an then one of the options which engines you want a replacement for. EDIT: i added reference models with some improvements over the normal vektor but same settings and specs on booth cars, except the engine of course. Both have a 6-Speed Manual. btw: the vektor 160 (no matter if 5 old 5 or new 6 speed) uses about 10.5-11l/100km at 120kmh (autobahn speed) in highest gear, the M40 uses just below 7l. O just 4l when driving 90 (because that's without turbo/open wastegate)
You are supposed to choose one option of the first two and then one of the 4 options below. The results are currently one for the first and one for the second option... just saying... EDIT: still no clear result but i decided on my own to replace the 160 and 250s and maybe even the "sequentially charged" 2.0 Turbo
Ok: the results say i should only make a replacement for the 160 and just add the versions with the New engine as 2019 models. So version 3.5 will be exactly this (+ the sedan will have a hood)
