I'm not sure what it is, but I figured maybe someone here would know some thing to fix this. Last time it happened. Any help is appreciated On Tue 2/16/2016 1:50:18 AM GMT your computer crashed crash dump file: C:\WINDOWS\Minidump\021516-43125-01.dmp This was probably caused by the following module: dxgkrnl.sys (dxgkrnl!SignalSynchronizationObjectInternal+0x6A3) Bugcheck code: 0x50 (0xFFFFF80100000180, 0x0, 0xFFFFF8013DAFBA93, 0x2) Error: PAGE_FAULT_IN_NONPAGED_AREA file path: C:\WINDOWS\system32\drivers\dxgkrnl.sys product: Microsoft® Windows® Operating System company: Microsoft Corporation description: DirectX Graphics Kernel Bug check description: This indicates that invalid system memory has been referenced. This appears to be a typical software driver bug and is not likely to be caused by a hardware problem. The crash took place in a standard Microsoft module. Your system configuration may be incorrect. Possibly this problem is caused by another driver on your system that cannot be identified at this time.
Look through and see what you installed right before the BSOD started happening. It could even be a much earlier install. I had a similar thing happen with a PS3 controller driver.
Sounds similar to my previous problem here. I don't know if its the same cause, but here it is. http://www.beamng.com/threads/urgen...creen-black-screen-beamng-log-included.18967/