WIP Beta released The Last Barstow V8 0.96.1

I removed as much of the interior on the barstow rust bucket body and the burnside rust devil body.
i still need to add a steering rack to the Barstow.Slow and steady but still progress.;-)

 

And the steering rack is in

 

That's how a properly scrap racer interior should be! Good work my friend.

 

Thank you Marcus,and i just got the steering wheel to work too,i used the barstow_steer_sport_d.dds you send me a while back and i made the s.dds and then filed it and now it works,just have to see if i can get less chrome and more rust.
--- Post updated ---
Yes got it.
--- Post updated ---
still need to adjust the steering wheel offset.
--- Post updated ---
And with correct offset.
--- Post updated ---
Now i need to figure out to do the pedals and the steering colum and it will be a proper rust bucket.;-)

 

And the Rust_Bucket interior is done for now,i left the shifter and clutchpedal stock because they are part of the gearbox.

I am about to upload v0.88,it's a small update with general fixes and some continued work on the Rust_Bucket parts.This is in preparation for the burnside mod v0.3 so the cobra wheels are correct.
--- Post updated ---
Just uploaded v0.88 with the proper cobra wheels,not the test ones from current version.
And remember clear cache,remove cache folder if you have one and remove the contents of the backups folder,it's best to do this after every update for the best error prevention.

 

Hi guys,got a goody today,managed to get a working dashmounted police beaconlight for the Barstow,only for the modded bodies not the original one because i have to add a beacon light slot to every body .jbeam.
Still need to do some hight adjustments to the beaconlight.
As for the interceptor,the config is now changed,the car stance is higher and suspension is completly resetup to prevent the rear tires going through the fenders as NeoSlx commented,and rightfully so.also reduced enginepower a bit for more drivability,you wont really notice the differents,but the ride is better.
Engine internals will be added along the line.
--- Post updated ---
And here it is red and blue beaconlights,positioned and scaled to fit the dash proper.
The mad max config now has the blue one as default.

 

audi4141 updated The Last Barstow V8 with a new update entry:

The Last Barstow V8

Read the rest of this update entry...
--- Post updated ---
And v0.88 is up and running
Here is a pic with the vintage Barstow with red beaconlight.

 

thank you that means alot that you take the time to write this down,love your campaignes btw nice work

 

yeah thats a shame those where Fun,but i read something in the devblog that they are working on the ai to add traffic,maybe thats why?

 

So i updated the interceptor engine today,for the people who want less power but still enjoy the car,i integrated the new jbeam and added a new engine internals option,the interceptor longblock,if you want less power just select the super heavy duty internals.

 

And the I6 Turbo Engine is updated too.now has internals and ecu,i also reintegrated the old i6 engine power as the Dragger internals and you can choose between stock non adjustable turbo or the adjustable turbo.

 

Hi guys,i have been testing the interceptor the last few days,played a bit with it and the config that is in v0.89 that is in for release is SETUP TOO HARD,i am trying to get a good balance between drivebility and looks,it's a very hard car too setup right,but i have been tuning it for 2 days and i made a new reinforced front subframe that can take the jumps a bit better.So guys the interceptor in v0.89 does not drive well if you play with it for a while,the config for v0.9 is ready and much more stable again,with a minimal of rear wheels going through the fenders.
--- Post updated ---
i just uploaded the hotfix for the interceptor.

 

Shortyceptor

 

audi4141 updated The Last Barstow V8 with a new update entry:

The Last Barstow V8

Read the rest of this update entry...

 

audi4141 updated The Last Barstow V8 with a new update entry:

The Last Barstow V8

Read the rest of this update entry...

 

I got some new parts for the Barstow,all new GRS brakes,reinforced front subframe regular and chrome,normal subframe in chrome.
And removed the old interceptor brakes and adapted the etk800 brakes like i did with the burnside.in normal,sport and race variations.
And changed almost all the configs to fit these parts.
--- Post updated ---
The good thing about these brakes aside from the stopping power is that they fit every suspension proper now,the interceptor brakes didn't.
--- Post updated ---
And i gave the race and drag driveshafts the GRS branding and a mesh to go with it.
And added a chrome rear leaf spring suspension for the vintage Barstow.and adjusted the config accordinly.

 

And i made a GRS rollcage same version as the Burnside
--- Post updated ---
And the new configs,preview pics and skins provided by Marcus.
-Primer_Opus
-Rusty_Opus
-Speed_Demon
-Tar_Opus

 

And i adapted the GRS seats Red and Black back to the Barstow,now both the burnside and the Barstow have these seat options.