1. Stuck or having problems creating your mod?

WIP Trampy Skins

Discussion in 'Mods and Skins' started by ItsJustCurtis, Dec 27, 2018.

  1. ItsJustCurtis

    ItsJustCurtis
    Expand Collapse

    Joined:
    Apr 10, 2017
    Messages:
    163
    I have an odd penchant for somewhat unloved looking motors. I build a semi tramp looking Pessima sometime ago using a basic skin. I've decided to take it to the next level with selectable colours and more detail:

    upload_2018-12-27_22-31-20.png

    upload_2018-12-27_22-32-23.png

    upload_2018-12-27_22-34-0.png

    An attempt at some lacquer peel has been made on the roof and trunk, I'm thinking I'll re-do this. I'm happy with the selection of coloured panels and the two tone panels, just need to add some more patina to make it a bit more believable
     
  2. ItsJustCurtis

    ItsJustCurtis
    Expand Collapse

    Joined:
    Apr 10, 2017
    Messages:
    163
    Doesn't look like much, but I've re-done the lacquer on the trunk and the rust on the fender

    upload_2018-12-28_15-0-47.png


    Added some soot to the exhaust, though I think this could do with being darker

    upload_2018-12-28_15-2-15.png

    Finally added some flaking paint on the bumper and rust trails from stone chips on the leading edges of the hood and roof

    upload_2018-12-28_15-3-48.png

    Need to find a good way to add road grime now and possibly some bumper stickers or similar and I can move onto the next car
     
    • Like Like x 4
  3. ItsJustCurtis

    ItsJustCurtis
    Expand Collapse

    Joined:
    Apr 10, 2017
    Messages:
    163
    And the first skin is complete! I'd like to work out why the underlying skin texture is so faded (red graphics on the door for example) and not as opaque as I'd like, and for some reason having the mod running on spawn seems to cause the game to misplace the non-body textures. Disabling the mod, reloading from disc then activating the mod seems to fix it though :/

    Less talk, more picture:





    Moving onto the next vehicles, I don't know if I should follow a similar pattern (primer rear arch, replaced hood, quarter and door) or if each car should have its own 'story' to tell?
     
    • Like Like x 4
  4. Kueso

    Kueso
    Expand Collapse

    Joined:
    Oct 14, 2016
    Messages:
    2,167
    nice
    also
    make every car look kinda different. dont follow a patern
     
    • Like Like x 1
  5. ItsJustCurtis

    ItsJustCurtis
    Expand Collapse

    Joined:
    Apr 10, 2017
    Messages:
    163
    upload_2018-12-31_10-17-20.png

    Following a partial T-Bone on the rear of this Pessima, New door, trunk and rear bumper had to be sourced, yet to wipe the marker off the bumper and bootlid, and the rear quarter needs another coat of paint after sanding.
     
    • Like Like x 3
  6. ItsJustCurtis

    ItsJustCurtis
    Expand Collapse

    Joined:
    Apr 10, 2017
    Messages:
    163
    upload_2018-12-31_19-51-3.png

    upload_2018-12-31_19-51-36.png

    upload_2018-12-31_19-52-7.png

    Some lacquer peel and the door off a taxi to finish this one off. Covet next. Any feedback appreciated
     
    • Like Like x 4
  7. ItsJustCurtis

    ItsJustCurtis
    Expand Collapse

    Joined:
    Apr 10, 2017
    Messages:
    163
    Spent far too long getting the UV map right to prevent blending issues with the fender rust

    upload_2019-1-1_16-30-44.png

    upload_2019-1-1_16-31-25.png

    Next challenge is finding some realistic looking moss to sit on the panels
     
    • Informative Informative x 1
  8. ItsJustCurtis

    ItsJustCurtis
    Expand Collapse

    Joined:
    Apr 10, 2017
    Messages:
    163
    upload_2019-1-1_20-52-1.png

    upload_2019-1-1_20-50-15.png

    Managed to get the moss to look right on the paint, problem now is getting the spread looking right, the cutoffs I've made around the hood and doors seem too harsh and not very realistic
     
    • Like Like x 5
  9. ItsJustCurtis

    ItsJustCurtis
    Expand Collapse

    Joined:
    Apr 10, 2017
    Messages:
    163






    Covet now complete. Still only one colour, undecided if I want to add a second colour choice (body panels or just two-tone)

    Onto the I-series
     
    • Like Like x 3
  10. Slimeboy2015

    Slimeboy2015
    Expand Collapse

    Joined:
    Jan 10, 2018
    Messages:
    413
    bro this looks great! could you make beater skins for all vehicles or the skins that give he panels different textures?
     
  11. ItsJustCurtis

    ItsJustCurtis
    Expand Collapse

    Joined:
    Apr 10, 2017
    Messages:
    163
    Well you've seen how long it's taken to get three done :p current plan is to get the I series and Miramar completed then I'll release to the repo. I'll start adding to that as updates when I put new vehicles in the pack.
     
    • Informative Informative x 1
  12. Slimeboy2015

    Slimeboy2015
    Expand Collapse

    Joined:
    Jan 10, 2018
    Messages:
    413
    nice. can't wait!
     
  13. HotWheelsCollector24™

    HotWheelsCollector24™
    Expand Collapse

    Joined:
    Apr 18, 2017
    Messages:
    2,093
    Nice! Any plans for a jalopy Autobello next? :D
     
  14. @op@

    @op@
    Expand Collapse

    Joined:
    Sep 10, 2017
    Messages:
    673
    Suggestions for I series
     

    Attached Files:

    • 7100_Temmekselt_30122011_026_1.jpg
    • 20110310_024.jpg
    • Like Like x 1
  15. ItsJustCurtis

    ItsJustCurtis
    Expand Collapse

    Joined:
    Apr 10, 2017
    Messages:
    163
    Thanks :) Dare I suggest that these are cars you know personally :p
     
  16. @op@

    @op@
    Expand Collapse

    Joined:
    Sep 10, 2017
    Messages:
    673
    No, just some google pics, i have a friend tho who has a similiar condition bmw 525 he is fixing up, i just didnt have good pictures of it.
     
  17. ItsJustCurtis

    ItsJustCurtis
    Expand Collapse

    Joined:
    Apr 10, 2017
    Messages:
    163
    upload_2019-1-5_23-19-32.png

    The missing paint on the hood of that E30 inspired me to go for a burnt out look on this one. I think some soot on the un-affected areas is all this one really needs. perhaps two tone the lower half?
     
    • Like Like x 2
  18. ItsJustCurtis

    ItsJustCurtis
    Expand Collapse

    Joined:
    Apr 10, 2017
    Messages:
    163




    I want to add some drip marks where the mirrors would have melted, but otherwise I am pretty happy with how this one has turned out.

    Miramar next, then final details and onto release :)
     
    • Like Like x 2
  19. Juicy Drift

    Juicy Drift
    Expand Collapse

    Joined:
    May 4, 2017
    Messages:
    32
    rust is lighter than carbon fibre ! love what your doing i am going to be cheeky here and ask if you would like to go in together...... more paints one pack the steel wheels are also skinned by me
     

    Attached Files:

    • screenshot_2019-01-08_17-17-09.png
    #19 Juicy Drift, Jan 8, 2019
    Last edited: Jan 8, 2019
    • Like Like x 1
  20. ItsJustCurtis

    ItsJustCurtis
    Expand Collapse

    Joined:
    Apr 10, 2017
    Messages:
    163
    upload_2019-1-13_16-8-41.png

    Sorry its been a while, only just got round to starting work on the Miramar. I'm trying to make the splitter and spoiler work with colour 3 but it doesn't appear to be playing ball. Not sure if the UV maps are off but I can't seem to get it to work. Perhaps an issue in my materials.cs file?
     
    • Like Like x 2
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice