Released Capsule 3.6

U have arcanox

 

yes i mean hybrid but Diesel capsule bus is work hybrid is don`t work
--- Post updated ---

yes i mean hybrid is don`t work but Diesel is work with no problems

 

Be sure that you have

https://www.beamng.com/resources/arcanox-core.6060/


Please notice, that Hybrid can still be broken as the Arcanox-Core Mod has not been updated in a long time.

 

i have this Arcanox-Core but hybrid is still broken

 

Have you reloaded the bus (ctrl+R) after spawning?

 

I imagine it's the Arcanox Core mod which is the culprit, seeing as only the hybrid models are affected, and that mod's been outdated for a few versions now.

Unrelated, but can you do something about the tuning of the EV variants' motor noise? It's legitimately painful to listen to at higher RPMs.

 

yes i reloaded the bus but always hybrid is not work and i reinstall it but still don`t working and i reinstall beamng drive but still not working

 

Did you able to shift the gear using Z and X keys after reloading?

 

The modern etk's screen changes between imperial and metric based off the one you chose for the ui, you could probably implement that for your screen too instead of having a keybind

 

no i can`t

 

I loaded this up in a fresh game. The electric variant works just fine so long as Arcanox Core is installed, the hybrid however does not. When the hybrid is loaded up it's already running even though the starter indicates it's off, when you try to start it it turns off & never comes back on.

 

Does it work after reloading (ctrl+R)?

 

It does not, it reloads already running still but doesn't go anywhere. It will even rev up but it just won't move.

 

Have you shifted the gear to D? Arcanox core only support "realistic" gearbox mode.

 

I did.

 

CYCJoseph updated Capsule with a new update entry:

4-axle single deck articulated variant

Read the rest of this update entry...

 

What da hail?

 

axle and wheel positions no longer match the rigid one, needs a new jbeam for articulated middle axle
--- Post updated ---
same issue with the bellows:

 

Have you cleared the cache?